LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Door Lock System And Release Systems) >> Repair Instructions >> Rear Closure Hands Free Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Closure Hands Free Module Bolt
    GM4573326Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install Rear Closure Hands Free Module Bolt (1) and tighten [4x] 5 N.m (44 lb in)
  2. Connect the electrical connector.
    3. Fig 2: Rear Bumper Fascia
    GM4571346Courtesy of GENERAL MOTORS COMPANY
  3. Install Rear Bumper Fascia (1)Rear Bumper Fascia Replacement (Equinox)Rear Bumper Fascia Replacement (Terrain)
  4. Perform the necessary programming and setup procedure: Control Module References
scientia non olet · About LEMON Manuals