Fastener Specifications
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Turbocharger Exhaust Pipe Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Exhaust Pipe Clamp (LSY) | 15 N.m (11 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bolt | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Bolt | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut | 22 N.m (16 lb ft) |
| Catalytic Converter Heat Shield Bolt | 9 N.m (80 lb in) |
| Catalytic Converter Heat Shield Nut | 9 N.m (80 lb in) |
| Catalytic Converter Nut | 50 N.m (37 lb ft) |
| Exhaust Heat Shield Bolt | 9 N.m (80 lb in) |
| Exhaust Heat Shield Nut | 9 N.m (80 lb in) |
| Exhaust Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Manifold Heat Shield Bolt | 10 N.m (89 lb in) |
| Exhaust Muffler Hanger Bracket Nut | 43 N.m (32 lb ft) |
| Exhaust Pipe Clamp (LGY and LT4 at Left Side Warm Up Three-Way Catalytic Converter) | 50 N.m (37 lb ft) |
| Exhaust Throttle Control Valve Actuator Solenoid Nut | 10 N.m (89 lb in) |
| Turbocharger Heat Shield Bolt (LGY, Large) | 15 N.m (11 lb ft) |
| Turbocharger Heat Shield Bolt (LGY, Small) | 9 N.m (80 lb in) |
| Turbocharger Heat Shield Bolt (LSY) | 9 N.m (80 lb in) |