Circuit/System Verification
WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On/Vehicle - In Service Mode
- Verify DTC C0569 is not set.
- If the DTC is set
- Perform all necessary programming and setup procedures for the control module: K43 Power Steering Control Module
- Verify the DTC does not set.
- If the DTC sets - Replace the component: K43 Power Steering Control Module
- If the DTC is not set
- All OK.
- Go to next step: If the DTC is not set
- All OK.