LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Power Steering System) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application
Power Steering Assist Motor Seal
Steering Gear Boot Inner Clamp
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application Specification
Metric (English)
Power Steering Assist Motor Bolt 21 N.m (15 lb ft)
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Steering Gear Bolt
  • First Pass:
100 N.m (74 lb ft)
  • Final Pass:
45 - 60 degrees
Steering Linkage Inner Tie Rod 105 N.m (77 lb ft)
Steering Linkage Outer Tie Rod Nut
  • First Pass:
35 N.m (26 lb ft)
  • Final Pass:
80 - 90 degrees