Human Machine Interface Control Module Replacement

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Human Machine Interface Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front side door sill garnish molding - right side. Front Side Door Sill Garnish Molding Replacement (Equinox)Front Side Door Sill Garnish Molding Replacement (Terrain) Reposition the front floor panel carpet as necessary.
1	Human Machine Interface Control Module Procedure Disconnect the electrical connectors. Release the retaining tab. Perform the necessary programming and setup procedure:Control Module References

Callout

Component Name

Preliminary Procedures

Remove the front side door sill garnish molding - right side. Front Side Door Sill Garnish Molding Replacement (Equinox)Front Side Door Sill Garnish Molding Replacement (Terrain)
Reposition the front floor panel carpet as necessary.

Human Machine Interface Control Module

Procedure

Disconnect the electrical connectors.
Release the retaining tab.
Perform the necessary programming and setup procedure:Control Module References