Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Electronic Brake Control Module (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

NOTE:
A new EBCM may not have threaded inserts. Refer to the Electronic Parts Catalog and use new self tapping fasteners to form the threads.

Electronic Brake Control Module Bolt (1) - Install and tighten in sequence [4x]
1. First Pass: 1.5 N.m (13 lb in)
2. Second Pass: 2.5 N.m (22 lb in)
3. Final Pass: 3.5 N.m (31 lb in)
Electronic Brake Control Module with Brake Pressure Modulator Valve - Install - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement (GMC)
Program the Electronic Brake Control Module. Control Module References
Bleed the brake system. Hydraulic Brake System Bleeding (Manual without JEO) , or Hydraulic Brake System Bleeding (Pressure without JEO) , or Hydraulic Brake System Bleeding (Pressure with JEO)