LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2021 >> Acadia AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Disc Brake System) >> Repair Instructions >> Front Brake Caliper Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4261519Courtesy of GENERAL MOTORS COMPANY

    Front Brake Caliper (1) - Install

  2. GM4261518Courtesy of GENERAL MOTORS COMPANY

    Front Brake Caliper Guide Pin Bolt (1) - Install and tighten [2x] 72 N.m (53 lb ft)

  3. GM4261517Courtesy of GENERAL MOTORS COMPANY

    Front Brake Hose Fitting Gasket (1) @ Front Brake Hose Fitting (2) - Install NEW [2x]

  4. GM4261516Courtesy of GENERAL MOTORS COMPANY

    Front Brake Hose Fitting (1) - Install - Front Brake Hose Replacement

  5. Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , or Hydraulic Brake System Bleeding (Pressure)
  6. Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
  7. Remove the support and lower the vehicle.