Replace and Program B174W Frontview Camera - Windshield or Reprogram B174W Frontview Camera - Windshield

To program a replacement or an existing B174W Frontview Camera - Windshield, perform the following procedure:

1. Access the Service Programming System (SPS) and follow the on-screen instructions.
2. On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield Programming and follow the on-screen instructions.
3. On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield Configuration and follow the on-screen instructions.
4. Clear DTCs
NOTE:

After programming, a current DTC may be set in the B174W Frontview Camera - Windshield that is unable to be cleared. This is normal and an indicator that the B174W Frontview Camera - Windshield is in learn mode.

5. Following B174W Frontview Camera - Windshield replacement and/or reprogramming, the module must be calibrated. Refer to Front View Camera Module Learn .