Replace and Program Control Module

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement control module, perform the following procedure :

Access the Service Programming System (SPS) and follow the on-screen instructions.
On the SPS Supported Controllers screen, select K17 Electronic Brake Control Module - Programming and follow the on-screen instructions.
On the SPS Supported Controllers screen, select K17 Electronic Brake Control Module - Setup and Configuration follow the on-screen instructions.
Clear DTCs
With a scan tool, perform the Electronic Brake Control Module-Control Functions Automated Brake Bleed following the scan tool instructions. Refer to Antilock Brake System Automated Bleed .