Replace and Program The Control Module
WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
To program a replacement K171 Hands-Free Liftgate Sensor Control Module, perform the following procedure :
- Connect the scan tool to the vehicle.
- Select Module Diagnosis :
- Select K39 Liftgate Control Module :
- Select Configuration/Reset Functions :
- Select Remove/Reset Module :
- Select K171 Hands-Free Liftgate Sensor Control Module Calibration :
- Press "Enter" and follow the on screen instructions :