LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2021 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P158A >> Circuit/System Verification
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Verification

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify there are no other DTCs set, except for DTC P158A.
    • Go to next step: If no other DTCs are set 
  3. NOTE:

    During the programming procedure, follow the Service Programming System (SPS) prompts for the correct ignition switch position.

  4. Reprogram ECU - - K9 Body Control Module & K20 Engine Control Module
  5. Operate the vehicle within the Conditions for Running the DTC. - Verify the DTC does not set.
    • Go to next step: If the DTC is not set 
  6. All OK.