Removal Procedure

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Use a flat bladed trim tool to depress the steering wheel airbag access hole cover detents to remove the 2 steering wheel airbag access hole covers (1).
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Airbag Bolt (1) - Remove [ 2x ]
Release the connector position assurance (CPA) retainer.
Disconnect the electrical connectors.
Steering Wheel Airbag (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Loosen the steering wheel bolt (1) so that 2 - 3 threads are engaged.
Wiggle the steering wheel until the wheel disengages completely.
Steering Wheel Bolt (1) - Remove
Steering Wheel (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Remove the 4 steering wheel spoke cover bolts (1).
Remove the 4 steering wheel bolts (2).
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Shroud (1) - Remove
Disconnect the heated steering wheel module electrical connectors, if equipped.
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Radio Volume Switch (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Radio Favorites Switch (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Spoke Cover Bolt (1) - Remove [ 2x ]
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Spoke Cover (1) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt (1) @ Cruise Control Switch - Remove [ 3x ]
Courtesy of GENERAL MOTORS COMPANY

Cruise Control Release Switch Bracket (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Cruise Control Switch (1) - Remove