LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2022 >> Terrain AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C056E (Power Steering Control Module) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2021 GMC Terrain and 2021 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Symptom Byte: 43, 45, 46, 47, 4A, or 5A

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC C056E is not set.
    • If the DTC is set 
    1. Perform all necessary programming and setup procedures for the control module: K43 Power Steering Control Module
    2. Verify the DTC does not set.
      • If the DTC sets - Replace the component: K43 Power Steering Control Module
      • Go to next step: If the DTC is not set
    3. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.

Symptom Byte: 42

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC C056E is not set.
    • If the DTC is set 
    1. Calibrate the power steering control module. Refer to Power Steering Control Module Calibration 
    2. Verify the DTC does not set.
      • If the DTC sets - Replace the component: K43 Power Steering Control Module
      • Go to next step: If the DTC is not set
    3. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.

Symptom Byte: 37

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC C056E is not set.
    • If the DTC is set 

      Replace the component: Steering Gear

    • Go to next step: If the DTC is not set 
  3. All OK.
scientia non olet · About LEMON Manuals