LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2022 >> Terrain AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Power Steering System) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2021 GMC Terrain and 2021 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application
Power Steering Assist Motor Seal
Steering Gear Boot Inner Clamp
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application Specification
Metric (English)
Power Steering Assist Motor Bolt 21 N.m (15 lb-ft)
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Steering Gear Bolt
  • First Pass:
100 N.m (74 lb-ft)
  • Final Pass:
45 - 60 degrees
Steering Gear Heat Shield Bolt 9 N.m (80 lb/in)
Steering Linkage Inner Tie Rod 105 N.m (77 lb-ft)
Steering Linkage Outer Tie Rod Nut
  • First Pass:
35 N.m (26 lb-ft)
  • Final Pass:
80 - 90 degrees