Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Engine Coolant Heater Seal |
| Engine Coolant Thermostat Housing Gasket |
| Engine Oil Cooler Gasket |
| Water Outlet Seal |
| Water Pump Gasket |
| Water Pump Housing Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Auxiliary Water Pump Bracket Bolt | 9 N.m (80 lb in) |
| Engine Coolant Fan Bolt | 5 N.m (44 lb in) |
| Engine Coolant Heater | 50 N.m (37 lb ft) |
| Engine Coolant Thermostat Housing Bolt | 10 N.m (89 lb in) |
| Ground Nut | 9 N.m (80 lb in) |
| Radiator Surge Tank Bolt | 9 N.m (80 lb in) |
| Radiator Upper Bracket Bolt | 14 N.m (124 lb in) |
| Thermostat Bypass Pipe Bolt | 10 N.m (89 lb in) |
| Turbocharger Coolant Feed Pipe Hollow Screw | 35 N.m (26 lb ft) |
| Turbocharger Coolant Return Pipe Fastener | 10 N.m (89 lb in) |
| Turbocharger Coolant Return Pipe Hollow Screw | 35 N.m (26 lb ft) |
| Water Outlet Bolt | 10 N.m (89 lb in) |
| Water Pump Bolt | 25 N.m (18 lb ft) |
| Water Pump Bolt@Water Pump Housing | 10 N.m (89 lb in) |