LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2023 >> Terrain AT4 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.5L (LSD) - Repair Instructions >> Repair Instructions >> Intake Air Pressure and Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. GM4600009Courtesy of GENERAL MOTORS COMPANY

    Intake Air Pressure and Temperature Sensor (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Intake Air Pressure and Temperature Sensor Bolt (1) - Install and tighten 5 N.m (44 lb in)
  3. Connect the intake air pressure and temperature sensor electrical connector.
  4. GM6174066Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Fuel Feed Hose Clip Bracket (2) - Install

  5. Fuel Feed Hose Protector Bolt (1) - Install and tighten 9 N.m (80 lb in)
  6. Perform the intake system learned values reset. Intake System Learned Values Reset 
scientia non olet · About LEMON Manuals