Removal Procedure
{If equipped} Intake Manifold Cover Bolt (1) - Remove [2x]
- If equipped, lift up on the front of the intake manifold cover (2).
{If equipped} Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove
Air Cleaner Outlet Duct Nut (1) - Remove [2x]
- Positive Crankcase Ventilation Tube (2) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Air Cleaner Outlet Duct Clamp (3) - Loosen
Disconnect the electrical connector.
- Evaporative Emission Canister Purge Tube (1) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Air Cleaner Outlet Duct Clamp (2) - Loosen
Air Cleaner Outlet Duct (1) - Remove
Retainer (1) - Disengage
- Engine Wiring Harness (2) - Reposition
Disconnect the electrical connector.
- Engine Oil Pressure Sensor (1) - Remove