Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Engine Control Module (1) - Install
Connect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Battery Distribution Engine Compartment Fuse Block (2) - Install
Wiring Harness Clip (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Battery Distribution Fuse Block Nut (1) - Install and tighten [2x] - Fastener Specifications
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
Program the ECM. Control Module References