Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Rear Seat Bolt - Left Side (1) - Remove [2x]
Rear Seat Recliner Outer Finish Cover - Left Side (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Bolt (1) - Remove [3x]
Rear Seat Inner Hinge Finish Cover (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Seat Bolt - Right Side (1) - Remove [2x]
Rear Seat Recliner Outer Finish Cover - Right Side (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Fold the left and right rear seat cushions (1) down.
Courtesy of GENERAL MOTORS COMPANY

Fold the left and right rear seat back cushions (1) down.
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Bolt - Left Side and Right Side (1) - Remove [2x]
Rear Seat Track Rear Outboard Cover - Left Side and Right Side (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Cargo Partition Track Bolt (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Cargo Container Mat - Left Rear (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Fold the left and right rear seat back cushions (1) up and into the locked position.
Courtesy of GENERAL MOTORS COMPANY

Cargo Partition Track Bolt (1) - Remove [7x]
Rear Auxiliary Stowage Box Rivet Nut (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Cargo Container Mat- Front (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors.
Active Safety Control Module Bracket Nut (2) - Remove [3x]
Image Processing Module (1) - Remove