Removal Procedure

Using the scan tool, deflate the automatic level control air supply reservoir.
Remove the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
Remove underbody panels as necessary. Underbody Panel Component Locator
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Wheelhouse Panel Rear Liner - Right Side (1) - Remove - Rear Wheelhouse Panel Rear Liner Replacement
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (2) - Disconnect
Remove the 7 automatic level control air compressor tube fittings (1) from the air suspension control module manifold assembly.
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Automatic Level Control Air Compressor Bolt (2) - Remove
Automatic Level Control Air Compressor Nut (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Automatic Level Control Module (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Remove the 2 automatic level control air compressor bolts (1).
Remove the air suspension control module manifold assembly and air suspension control module (2) as an assembly.
Courtesy of GENERAL MOTORS COMPANY

Automatic Level Control Air Compressor Tube (1) @ Automatic Level Control Air Compressor - Remove