LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module & Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

CAUTION: Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Install a new front impact sensor.
  2. Tighten the front impact sensor mounting nut.

    Tightening torque: 

    8.0 ~ 10.0 N.m (0.82 ~ 1.02 kgf.m, 5.9 ~ 7.4 lb-ft)

  3. Connect the front impact sensor connector.
  4. Install the radiator assembly.
  5. Reconnect the battery negative cable.
  6. After installing the front impact sensor, confirm proper system operation:

Turn the ignition switch ON; the SRS indicator light should turn on for about six seconds and then go off.

scientia non olet · About LEMON Manuals