LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module & Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal: Notes

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector (s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the radiator assembly.

    (Refer to Engine Mechanical System - "RADIATOR ")

  3. Disconnect the front impact sensor connector (A), and them loosen the nuts to remove the front impact sensor (B).