LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module & Sensors >> Occupant Classification System (OCS) >> Repair Procedures >> Installation >> OCS Mat
April 5, 2026: LEMON Manuals is launched! Read the announcement.

OCS Mat

  1. Install the OCS Mat equipped seat cushion assembly on the front seat assembly.

    (Refer to Body - "FRONT SEAT ")

  2. Connect the OCS mat connector.
  3. Install the front passenger seat assembly.

    (Refer to FRONT SEAT ASSEMBLY Body )

  4. Reconnect the battery negative cable.
  5. After installing the OCS, confirm proper system operation:
    • Turn the ignition switch ON the SRS indicator should be turned on for about six seconds and then go off.
    • Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the OCS does not require suppression and the passenger airbag is enabled.
    NOTE: Be sure to perform OCS zeroing with GDS after replacing OCS equipped seat cushion.
scientia non olet · About LEMON Manuals