Major Features: Notes
- Display Vehicles Surrounding in Video
The surrounding area video display function displays the 360 degrees video image captured through 4 cameras to the driver through the Head Unit Screen while the vehicle is moving at low speed or going reverse. The Multi-view Camera System displays total of 8 video modes for displaying surrounding video based on the vehicle driving state and the driver's selection.
- Guide Line Indication & Steering Wheel Synchronized Feature
The Guide Line Indication & Steering Wheel Synchronized Feature is the function that assists the driver in parking by synchronizing the steering wheel with the rear view video display marked with a guide line to help anticipate the direction of the vehicle going reverse.
- Front/Rear Object Warning (Obstacle Detection Feature)
The system receives obstacle warning signal from the PAS sensors mounted on the front/rear of the vehicle and displays the obstacle location on the Multi-view Camera System Unit Screen.
- Tolerance Compensation (including A/S)
Manual Tolerance Compensation Software is embedded in the Multi-view Camera System Unit to compensate the Multi-view Camera deviation that may occur due to assembly line installation tolerance. You must first setup proper work environment in order to perform correct tolerance compensation.