LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Brake System) >> Stop Signal Electronic Module >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the AVN unit.

    (Refer to Body Electrical System - "AVN SYSTEM ")

    (Refer to Body Electrical System "PREMIUM AUDIO/VISUAL/NAVIGATION (AVN) SYSTEM )

  3. Remove the glove box.

    (Refer to Body - "GLOVE BOX ")

  4. Disconnect the stop signal electronic module connector (A).
  5. Remove the clip (B) and then remove the stop signal electronic module.
    G11340337Courtesy of
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals