LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Engine Control System) >> Engine Control Module (ECM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn Ignition Switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the battery.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Remove the air cleaner assembly and intake air hose.

    (Engine Mechanical System - "AIR CLEANER ")

  4. Disconnect the ECM connector (A)
  5. Remove the ECM bracket assembly (B) after loosening the mounting bolts and nuts.
    Fig 1: ECM Connector Location
    G11856616Courtesy of KIA MOTORS AMERICA, INC.
  6. After removing the mounting nuts (A), remove the ECM from the bracket.
Fig 2: Locating Mounting Nuts
G11856617Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals