Repair Procedures: Removal
WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the engine OFF.
- Disconnect the battery negative cable and wait for at least three minutes before beginning work.
- Remove the floor console assembly.
(Refer to Body - "FLOOR CONSOLE ASSEMBLY ")
- Pull up the lock of the SRSCM connector to disconnect the connector (A and B).
- Remove the SRSCM mounting bolts (3EA) from the SRSCM, then remove the SRSCM.
CAUTION:
You must remove or install the SRSCM or other SRS components with the ignition switch OFF to avoid accidental airbag deployment.