LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2018 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column Module >> Steering Column Module >> Description And Operation >> Normal Operation >> Automatic Tilt And Telescope Position Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Tilt And Telescope Position Adjustment

Tilt & Telescope position is controlled according to changes such as "options other than IGN SW SCM Key Off" → "Key Off" or vice versa.

If the mode switches from options other than IGN SW SCM Key Off to IGN SW SCM Key Off, the tilt and telescope move to the maximum up soft limit and maximum backward soft limit.

If the mode switches from IGN SW SCM Key Off to options other than IGN SW SCM Key Off, then the tilt and telescope returns to the position at the time when options other than IGN SW SCM Key Off changed to Key Off.

  1. Operation conditions when getting on the vehicle
    • IGN SW SCM Key OFF → options other than Key OFF
  2. Operation conditions when getting OFF the vehicle and position memorization conditions
    • Options other than IGN SW SCM Key OFF → Key OFF
    • When the driver gets OFF from the vehicle, the tilt and telescope move to the maximum up soft limit and maximum backward soft limit respectively.

      When an error occurs, however, the tilt and telescope motor moves to the maximum up and maximum backward position.

  3. Stop conditions when getting ON/OFF
  4. Pause conditions when getting ON
    • During button start, when IGN SW SCM changes from ST to IGN, the driver in operation is performed.
    • When the IGN SW SCM switches from IGN to ST while getting on, the driver in operation pauses temporarily.

      If the IGN SW SCM returns from ST to IGN within 30 seconds, then tilt and telescope move to the position memorized 100 ms later.

    • If the IGN SW SCM switches from ST to IGN after 30 seconds, the driver in operation is not performed.
  5. Relationship between driver in/out operation and reproduction
    • If reproduction signal is received while the driver is getting on the vehicle, If the reproduction CAN signal is received while the driver is getting on the vehicle, then the driver in operation is stopped and reproduction is performed.
    • If operation signal for getting OFF is received during reproduction,

      If the driver out operation CAN signal is received during reproduction, then reproduction is stopped and the driver out operation is performed.

scientia non olet · About LEMON Manuals