LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G80 3.8, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 3.8L >> Sub Fuel Sender >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Release the Residual Pressure In Fuel Line.

    (Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  3. Remove the Rear Seat Cushion Assembly.

    (Refer to Body - "REAR SEAT ASSEMBLY ")

  4. Remove the fuel pump service cover (A) after loosening the screws.
    G12657756Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the sub fuel sender connector (A) and fuel tank pressure sensor connector (B).
    G12657757Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the sub fuel sender from the fuel tank after removing mounting bolts.
    G12657758Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals