Repair Procedures: Installation
- Disconnect the battery negative cable and wait for at least three minutes.
- Install the Knee airbag.
Tightening torque:
7.8 - 11.7 N.m (0.8 - 1.2 kgf.m, 5.7 - 8.6 lb-ft)
- Install the crash pad lower panel.
(Refer to Body - "CRASH PAD LOWER PANEL ")
- Reconnect the battery negative cable.
- After installing the knee airbag, confirm proper system operation.
Turn the ignition switch ON; the SRS indicator light should turn on for about six seconds and then go off.