Component Inspection
- Replace alternator.
- Turn off the ignition switch.
- Connect GDS to Data Link Connector (DLC).
- Clear DTC and Test-drive under Enable Conditions above-mentioned.
- Check the "DTC".
- Does the GDS show DTC "P0A1A"?
YES
- Substitute with a known - good ECM/ECM and check for proper operation. If the problem is corrected, replace ECM/ECM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute with a known - good alternator and check for proper operation. If the problem is corrected, replace alternator and go to "VERIFICATION OF VEHICLE REPAIR " procedure.