| DTC Strategy |
|
- Poor connection
- leak or clog in intake air system
- Injector
- Fuel pressure
- B1/S1
|
| Enable Condition |
- Sensor ceramic temperature is higher than 7200°C (1328°F)
- Engine Coolant Temperature is higher than 35°C (95°F)
- Purge active time is higher than 5 sec
- Exhaust Gas temperature is higher than 450°C (842°F)
- Engine speed is between 1080 RPM and 2520 RPM
- Engine load is between 18% and lower than 65%
- Fuel cut off
- Fuel feed back control active
|
| Threshold Value |
- Ratio of expected area to actual area is lower than 0.20
|
| Diagnosis Time |
|
| MIL ON Condition |
|