LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2022 >> G70 3.3T, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 3.3L (5 Of 7) >> DTC P061B-00: Internal Control Module Torque Calculation Performance >> DTC Information >> DTC Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Description

P061B00 is set when the actual torque is over the set point by the following faults:

NOTE: In some cases, the P061B00 was set due to an error in MAPS*. When P061B00 is set, you should refer to this example to check the MAPS*.

Information 

DTC State Description Solution
"Active" 
  • Present fault
  • Inspect the fault.
"Histroy" 
  • Histroy fault
  • Inspect an intermittent fault.
  • Record all DTCs/DTC state/Freeze Frame Data and then clear the DTCs.
"Pending" 
  • Not yet confirmed fault by the 'DTC Setting Condition'

ETM_SD313-21_MAPS 

Component Name_ETM ETM
MAPS*  "MAP SENSOR" SD313-21
ECM*  "ECM"
scientia non olet · About LEMON Manuals