DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
Main Action	Level 2 process monitoring	Poor connection or damaged harness Faulty MAPS* Faulty ECM*
Prerequisite Condition	Engine speed during engine start: Above 32 RPM
Threshold value	Difference between the calculated torque value and the actual torque value: Over 50Nm~350Nm
Diagnosis Time	480 ms
MIL	2nd Driving Cycle*

Driving Cycle*: DC MIL* : Malfunction Indicator Lamp

When [IG ON→Engine ON→IG OFF→IG ON] is performed, the Driving Cycle* 1time (1DC) is completed.
When the fault detected during the 1st DC is still detected during the 2nd DC, the fault is confirmed. And then 'MIL ON' is output from the ECM*.