LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2023 >> Electrified G80 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraints System Control Module (SRSCM) >> Occupant Classification Sensor (OCS) >> Installation >> Occupant Classification System (OCS) Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Occupant Classification System (OCS) Sensor

  1. Install the passenger seat cushion assembly.

    (Refer to Body (Interior and Exterior) - "FRONT SEAT ASSEMBLY ")

  2. Connect the OCS sensor connector.
  3. Install the front passenger seat assembly.

    (Refer to Body (Interior and Exterior) - "FRONT SEAT ASSEMBLY ")

  4. Reconnect the battery negative (-) terminal.
  5. After installing the OCS, confirm proper system operation.
    NOTE:
    • Turn the ignition switch ON the SRS indicator should be turned on for about 3-6 seconds and then go off.
    • Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the OCS does not require suppression and the passenger airbag is enabled.
    • Be sure to perform OCS reset with GDS after replacing OCS equipped seat cushion.
scientia non olet · About LEMON Manuals