(Driver Airbag (Dab) Module And Clock Spring Removal And Installation)
Abbreviated Procedures
| Work | H/W | Tightening Torque N.M (Kgf.M/Lb-Ft) | Sst/Equipment | Chemical | Etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Shut Off The High Voltage Circuit | - | - | Diagnostic Tool | - | - |
| 2 | Remove The Driver Airbag (Dab) | - | - | - | - | - |
| 3 | Disconnect The Airbag Module Connector | - | - | - | - | - |
| 4 | Disconnect The Steering Wheel Connector | - | - | - | - | - |
| 5 | Remove The Steering Wheel | Bolt | 39.2 - 49.0 (4.0 - 5.0/28.9 - 36.2) | - | - | Do Not Reuse The Bolt |
| 6 | Remove The Front Door Body Side Weather Strip | - | - | - | - | - |
| 7 | Remove The Crash Pad Side Cover [Lh] | Fastener | - | - | - | - |
| 8 | Disconnect The Diagnostic Tool Connector | - | - | - | - | - |
| 9 | Remove The Crash Pad Lower Panel | Fastener/Screw | - | - | - | |
| 10 | Disconnect The Crash Pad Lower Panel Switch Connector | - | - | - | - | - |
| 11 | Remove The Steering Column Shroud Upper Panel | Fastener | - | - | - | - |
| 12 | Remove The Steering Wheel Column Shroud Lower Panel | Screw | - | - | - | - |
| 13 | Disconnect The Steering Column Shroud Lower Panel Connector | - | - | - | - | - |
| 14 | Disconnect The Multifunction Switch Connectors | - | - | - | - | - |
| 15 | Remove The Multifunction Switch Assembly | Bolt | - | - | - | Refer To Shop Repair Information |
|
||||||
| Install In The Reverse Order Of Removal | ||||||
|
||||||