Smart Key Code Saving
WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the DLC cable of Diagnostic tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on Diagnostic tool.NOTE:
- When registering the smart key, place the smart key in the emergency start-up groove (A) of the floor console.
- Select the 'S/W Management' and 'Car model'.
- Select the 'Integrated Body Control Unit-SMK' and 'Smart Key Code Saving'.
- Follow the instructions on the screen.