Steering Column Module (SCM) switch
WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the crash pad lower panel.
(Refer to Body - "CRASH PAD LOWER PANEL ")
- Disconnect the steering column module connector.
(Refer to Body - "STEERING COLUMN SHROUD PANEL ")
- Disconnect the steering module switch connector and clip (A).
- Using the driver, remove the steering column module switch (A).
- Install in the reverse order of removal.