Mood Lamp Module: Function
The mood lamp control system consists of a MLM* and mood lamp controllers. The MLM* judges and controls the operation of the mood lamp by sending/receiving mood lamp control-related signals via CAN communication. And, the MLM* controls the mood lamp controller via LIN communication.
- USM* Information: Moodlamp ON/OFF, color and brightness
→ A separate USM* setting is required to control the brightness of the mood lamp. This is different from the rheostat adjustment that controls the interior lights.
- Vehicle Information: Moodlamp's ON/OFF timing and B+, ACC, IG1, IG2
- Control of the slave controller: Moodlamp ON/OFF, color and brightness
| Component | Name_ETM | Description | ETM |
|---|---|---|---|
| ICU* | "ICU JUNCTION BLOCK" | Integrated Central Unit | SD929-6 |
| MLM* | "MOOD LAMP UNIT" | Mood Lamp Master module | |
| Cockpit Mood Lamp 0 | "CRASH PAD SWITCH_LIN (Garnish Mood Lamp LH)" | MLM slave, Mood lamp controller | |
| Cockpit Mood Lamp 1 | "GARNISH MOOD LAMP RH" | ||
| Front Left Door Mood Lamp 0 | "DRIVER DOOR MOOD LAMP #1" | SD929-7 | |
| Front Left Door Mood Lamp 1 | "DRIVER DOOR MOOD LAMP #2" | ||
| Front Right Door Mood Lamp 0 | "PASSENGER DOOR MOOD LAMP #1" | ||
| Front Right Door Mood Lamp 1 | "PASSENGER DOOR MOOD LAMP #2" | ||
| Rear Left Door Mood Lamp 0 | "REAR DOOR MOOD LAMP UNIT LH #1" | SD929-8 | |
| Rear Left Door Mood Lamp 1 | "REAR DOOR MOOD LAMP UNIT LH #2" | ||
| Rear Right Door Mood Lamp 0 | "REAR DOOR MOOD LAMP UNIT RH #1" | ||
| Rear Right Door Mood Lamp 1 | "REAR DOOR MOOD LAMP UNIT RH #2" | ||
| Floor Console Mood Lamp 0 | "CONSOLE MOOD LAMP" | SD929-6 | |
| USM* | User Settings Mode, "User Settings" in the cluster | ||