LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2023 >> GV80 3.5T Advanced >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seat Assembly >> Front Seat Frame Assembly >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

CAUTION:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Put on gloves to prevent hand injuries.
  1. Remove the front seat back cover.

    (Refer to "FRONT SEAT BACK COVER ")

  2. Remove the front seat cushion cover.

    (Refer to "FRONT SEAT CUSHION COVER ")

  3. Remove the side airbag (SAB) module.

    (Refer to Restrains (Airbag (Event #1) - "SIDE AIRBAG (SAB) MODULE ")

  4. Remove the lumber support assembly.

    (Refer to Body Electrical System - "LUMBER SUPPORT SYSTEM ")

  5. Loosen the mounting bolts and separate the front seat back frame (A) and front seat cushion frame (B).

    Tightening torque: 

    58.8 - 68.6 N.m (6.0 - 7.0 kgf.m, 43.4 - 50.6 lb-ft)

    G14723598Courtesy of HYUNDAI MOTOR AMERICA
  6. To install, reverse removal procedure.

    Information 

    • For the seat equipped with side airbag, remove the side airbag from the seat frame assembly. (Refer to Restraint - "SIDE AIRBAG (SAB) MODULE ")
    • Before service, be fully aware of precautions and service procedure relevant to air bag. (Refer to Restraint - "SIDE AIRBAG (SAB) MODULE ")
scientia non olet · About LEMON Manuals