LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1993 >> Metro XFi >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Toe-In Adjustment >> Rear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Toe-In Adjustment: Rear

  1. Adjust rear wheel toe-in by rotating control rod inside bolt (cam bolt). See Fig 1 . Loosen right and left control rod inside nuts. Turn right and left control rod inside bolts same amount to set toe-in to specification. See ALIGNMENT SPECIFICATIONS  table.
  2. After adjustment, tighten right and left control rod inside nuts to specification while holding control rod inside bolts. See TORQUE SPECIFICATIONS  .
Fig 1: Adjusting Rear Toe-In
G90G00709Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals