LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1994 >> Tracker LSi, 1.6 6, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. With ignition off, remove air cleaner assembly (if necessary). Disconnect TP sensor harness connector, and remove mounting screws.
  2. To install, mount TP sensor to throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install mounting screws finger tight. Adjust TP sensor. See THROTTLE POSITION (TP) SENSOR in ON-VEHICLE ADJUSTMENTS article.
scientia non olet · About LEMON Manuals