Functional Test
- Turn ignition switch to ON position. Pull front wiper/washer lever. Front washer pump should operate. On models equipped with intermittent wipe cycle, wipers should also complete at least one full sweep.
- Move front wiper/washer switch lever to LO position. Wipers should operate at low speed.
- Move front wiper/washer switch lever to HI position. Wipers should operate at high speed.
- On models equipped with intermittent wipe cycle, move front wiper/washer switch lever to INT position. Wipers should sweep once every 6 seconds.
- On all models, move front wiper/washer switch lever to OFF position. Wipers should complete cycle and return to park position.