Shift Control Cable
WARNING: This page is about a different car, the 1996 Geo Prizm and 1995 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
- Set parking brake. Loosen adjusting nut on transaxle selector lever. Move selector lever on transaxle fully counterclockwise to Park.
- Move shift selector lever clockwise 2 notches to Neutral while holding selector lever, pull shift control cable tight. Tighten adjustment nut. Ensure vehicle will not move with ignition switch in LOCK position, and transaxle gearshift lever in Park. Ensure correct operation in other gearshift positions.