LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1997 >> Tracker Base, 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Bench Testing >> Rectifier Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rectifier Test

  1. Using an ohmmeter, measure resistance, between each diode lead and upper/lower rectifier bodies. Perform STEP 1. See Fig 1 . Check resistance in both directions by reversing ohmmeter leads. Resistance should be greater than 5 ohms in one direction and less than 5 ohms in the other direction. If resistance is not as specified, replace rectifier.
  2. Using an ohmmeter, measure resistance between diode trio leads. Perform STEP 2. See Fig 1 . Resistance should be greater than 5 ohms in one direction and less than 5 ohms in the other direction. Replace rectifier if resistance is not as specified.
Fig 1: Testing Generator Rectifier
G91H02007Courtesy of GENERAL MOTORS CORP.