LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1987 >> Accord LX, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Control System >> Code Testing >> Code 5, Map Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code 5, Map Sensor

  1. Turn ignition off. Remove No. 11 fuse in the under-hood relay box for 10 seconds to reset ECU. Start engine and observe PGM-FI warning light. If light is off, problem is intermittent. Test drive and check again.
  2. If light is on, turn ignition off. Using a "T" fitting, connect a handheld vacuum pump/gauge into vacuum hose between throttle body and MAP sensor. Start engine. If vacuum is not present, repair as necessary. If vacuum is present and holds, turn ignition off.
  3. Connect inspection harness between MAP sensor and harness. Turn ignition on. Measure voltage between White (pos.) terminal and Green (neg.) terminal. If reading is not about 3 volts, replace MAP sensor. If voltage reading is about 3 volts, substitute a known good ECU. If condition is rectified, replace original ECU.
scientia non olet · About LEMON Manuals