LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1997 >> CR-V SDMA >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Service & Adjustment Specifications >> Quick-Service >> Service Intervals & Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Intervals & Specifications

REPLACEMENT INTERVALS

Component Interval (Miles)
Air Filter 30,000
Active Torque Transfer System (ATTS) 90,000
Brake Fluid 45,000
Coolant 45,000
Fuel Filter (1)
Engine Oil Filter 15,000
Engine Oil 7500
Rear Differential Oil 60,000
Spark Plugs 30,000
Timing Belt & Balancer Belt (If Equipped) (2) 105,000
Transaxle Fluid
Continuously Variable Transaxle (CVT) 30,000
Except CVT 90,000
(1) Fuel filter should be replaced when fuel pressure drops below specification with fuel pressure regulator vacuum hose disconnected and pinched. See REGULATED FUEL PRESSURE  under FUEL SYSTEM. Ensure fuel pump and fuel pressure regulator are okay.
(2) Inspect water pump.
BELT ADJUSTMENT

Application (1) Deflection - In. (mm)
Generator
New Belt (2) 7/32-5/16 (6.0-8.0)
Used Belt (3) 11/32-15/32 (9.0-12.0)
A/C Compressor
New Belt (2) 3/16-9/32 (5.0-7.0)
Used Belt (3) 5/16-7/16 (8.0-11.0)
Power Steering
New Belt (2) 5/16-13/32 (8.0-10.0)
Used Belt (3) 7/16-19/32 (11.0-15.0)
(1) With 22 lbs. (10 kg) pressure applied midway on longest belt run.
(2) Install new belt to new specification. Run for 5 min. and readjust to used belt specification.
(3) Specification is for a used belt. Belt is considered used when it has been run for 5 min. or more.
scientia non olet · About LEMON Manuals