LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1997 >> CR-V SDMA >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Resistance (External Coil)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Coil Resistance (External Coil)

  1. Turn ignition off. Remove primary and secondary leads from ignition coil. Using an ohmmeter, check primary resistance between ignition coil connector terminals "A" and "B". See Fig 1 . Resistance should be as specified. See IGNITION COIL RESISTANCE  .
  2. Check secondary resistance between ignition coil connector terminal "A" and secondary output terminal (coil tower). See IGNITION COIL RESISTANCE  . Check for continuity between terminals "A" and "C". Continuity should exist. If readings are not within specification, replace coil.
    Fig 1: Identifying Typical External Ignition Coil Terminals
    G92A25130Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals