LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1998 >> Prelude Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Bench Testing >> Brush Holder Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brush Holder Test

  1. Using a DVOM, check continuity between positive and negative brush holders (brackets). Continuity should not exist. If continuity exists, brush holder assembly is shorted and must be replaced.
  2. Check brush length and spring tension. If brush length or spring tension is less than specification, replace brushes. See STARTER SPECIFICATIONS  . Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals