Brake System Inspection and Test: Notes

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the brake system components listed. Repair or replace any parts that are leaking or damaged.

COMPONENT INSPECTIONS:

Component	Procedure	Also check for:
Master Cylinder	Look for damage or signs of fluid leakage at: Reservoir or reservoir grommets Line joints Between master cylinder and booster	Bulging seal at reservoir cap. This is a sign of fluid contamination.
Brake Hoses	Look for damage or signs of fluid leakage at: Line joints and banjo bolt connections Hoses and lines, also inspect for twisting or damage	Bulging, twisted, or bent lines.
Caliper	Look for damage or signs of fluid leakage at: Piston seal Banjo bolt connections Bleed screw	Seized or sticking caliper pins.
VSA Modulator-Control Unit	Look for damage or signs of fluid leakage at: Line joints Modulator-control unit